`getPrimOp` function was basically identical to existing
`Value::primOpAppPrimOp` modulo some trivial differences.
Makes sense to reuse existing code for that.
This patch adds support for a native stack sampling
profiler to the evaluator, which saves a collapsed stack
profile information to a configurable location.
Introduced options (in `EvalSettings`):
- `eval-profile-file` - path to the collected profile file.
- `eval-profiler-frequency` - sampling frequency.
- `eval-profiler` - enumeration option for enabling the profiler.
Currently only `flamegraph` is supported, but having this an
enumeration rather than a boolean switch leaves the door open
for other profiler variants (e.g. tracy).
Profile includes the following information on best-effort basis (e.g. some lambdas might
have an undefined name). Callstack information contains:
- Call site location (where the function gets called).
- Primop/lambda name of the function being called.
- Functors/partial applications don't have a name attached to them unlike special-cased primops and lambads.
For cases where callsite location isn't available we have to resort to providing
the location where the lambda itself is defined. This removes some of the confusing
`«none»:0` locations in the profile from previous attempts.
Example usage with piping directly into zstd for compression:
```
nix eval --no-eval-cache nixpkgs#nixosTests.gnome \
--eval-profiler flamegraph \
--eval-profile-file >(zstd -of nix.profile.zstd)
```
Co-authored-by: Jörg Thalheim <joerg@thalheim.io>
This wires up the {pre,post}FunctionCallHook machinery
in EvalState::callFunction and migrates FunctionCallTrace
to use the new EvalProfiler mechanisms for tracing.
Note that branches when the hook gets called are marked with [[unlikely]]
as a hint to the compiler that this is not a hot path. For non-tracing
evaluation this should be a 100% predictable branch, so the performance
cost is nonexistent.
Some measurements to prove support this point:
```
nix build .#nix-cli
nix build github:nixos/nix/d692729759e4e370361cc5105fbeb0e33137ca9e#nix-cli --out-link before
```
(Before)
```
$ taskset -c 2,3 hyperfine "GC_INITIAL_HEAP_SIZE=16g before/bin/nix eval nixpkgs#gnome --no-eval-cache" --warmup 4
Benchmark 1: GC_INITIAL_HEAP_SIZE=16g before/bin/nix eval nixpkgs#gnome --no-eval-cache
Time (mean ± σ): 2.517 s ± 0.032 s [User: 1.464 s, System: 0.476 s]
Range (min … max): 2.464 s … 2.557 s 10 runs
```
(After)
```
$ taskset -c 2,3 hyperfine "GC_INITIAL_HEAP_SIZE=16g result/bin/nix eval nixpkgs#gnome --no-eval-cache" --warmup 4
Benchmark 1: GC_INITIAL_HEAP_SIZE=16g result/bin/nix eval nixpkgs#gnome --no-eval-cache
Time (mean ± σ): 2.499 s ± 0.022 s [User: 1.448 s, System: 0.478 s]
Range (min … max): 2.472 s … 2.537 s 10 runs
```
The intention is to switch to transparent comparators from N3657 for
ordered set containers for strings and using the alias consistently
would simplify things.
Rather than "mounting" the store inside an empty virtual filesystem,
just return the store as a virtual filesystem. This is more modular.
(FWIW, it also supports two long term hopes of mind:
1. More capability-based Nix language mode. I dream of a "super pure
eval" where you can only use relative path literals (See #8738), and
any `fetchTree`-fetched stuff + the store are all disjoint (none is
mounted in another) file systems.
2. Windows, where the store dir may include drive letters, etc., and is
thus unsuitable to be the prefix of any `CanonPath`s.
)
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
For example, instead of doing
#include "nix/store-config.hh"
#include "nix/derived-path.hh"
Now do
#include "nix/store/config.hh"
#include "nix/store/derived-path.hh"
This was originally planned in the issue, and also recent requested by
Eelco.
Most of the change is purely mechanical. There is just one small
additional issue. See how, in the example above, we took this
opportunity to also turn `<comp>-config.hh` into `<comp>/config.hh`.
Well, there was already a `nix/util/config.{cc,hh}`. Even though there
is not a public configuration header for libutil (which also would be
called `nix/util/config.{cc,hh}`) that's still confusing, To avoid any
such confusion, we renamed that to `nix/util/configuration.{cc,hh}`.
Finally, note that the libflake headers already did this, so we didn't
need to do anything to them. We wouldn't want to mistakenly get
`nix/flake/flake/flake.hh`!
Progress on #7876
There are two big changes:
1. Public and private config is now separated. Configuration variables
that are only used internally do not go in a header which is
installed.
(Additionally, libutil has a unix-specific private config header,
which should only be used in unix-specific code. This keeps things a
bit more organized, in a purely private implementation-internal way.)
2. Secondly, there is no more `-include`. There are very few config
items that need to be publically exposed, so now it is feasible to
just make the headers that need them just including the (public)
configuration header.
And there are also a few more small cleanups on top of those:
- The configuration files have better names.
- The few CPP variables that remain exposed in the public headers are
now also renamed to always start with `NIX_`. This ensures they should
not conflict with variables defined elsewhere.
- We now always use `#if` and not `#ifdef`/`#ifndef` for our
configuration variables, which helps avoid bugs by requiring that
variables must be defined in all cases.
The short answer for why we need to do this is so we can consistently do
`#include "nix/..."`. Without this change, there are ways to still make
that work, but they are hacky, and they have downsides such as making it
harder to make sure headers from the wrong Nix library (e..g.
`libnixexpr` headers in `libnixutil`) aren't being used.
The C API alraedy used `nix_api_*`, so its headers are *not* put in
subdirectories accordingly.
Progress on #7876
We resisted doing this for a while because it would be annoying to not
have the header source file pairs close by / easy to change file
path/name from one to the other. But I am ameliorating that with
symlinks in the next commit.
The underlying issue is that debugger code path was
calling PosTable::operator[] in each eval method.
This has become incredibly expensive since 5d9fdab3de.
While we are it it, I've reworked the code to
not use std::shared_ptr where it really isn't necessary.
As I've documented in previous commits, this is actually
more a workaround for recursive header dependencies now
and is only necessary in `error.hh` code.
Some ad-hoc benchmarking:
After this commit:
```
Benchmark 1: nix eval nixpkgs#hello --impure --ignore-try --no-eval-cache --debugger
Time (mean ± σ): 784.2 ms ± 7.1 ms [User: 561.4 ms, System: 147.7 ms]
Range (min … max): 773.5 ms … 792.6 ms 10 runs
```
On master 3604c7c51:
```
Benchmark 1: nix eval nixpkgs#hello --impure --ignore-try --no-eval-cache --debugger
Time (mean ± σ): 22.914 s ± 0.178 s [User: 18.524 s, System: 4.151 s]
Range (min … max): 22.738 s … 23.290 s 10 runs
```
This fixes a few of the property tests, now that the property tests
are actually generating arbitrary data - some of that data now
requiring experimental features to function properly.
Note that in pure mode, we don't need to use the union FS even when
using a chroot store, since the user shouldn't have access to the
physical /nix/store.
E.g. in a derivation attribute `foo = ./bar`, if ./bar is a symlink,
we should copy the symlink to the store, not its target. This restores
the behaviour of Nix <= 2.19.
When diagnosing infinite recursion references to nullptr `Env` can be formed.
This happens only with `ExprBlackHole` is evaluated, which always leads to
`InfiniteRecursionError`.
UBSAN log for one such case:
```
../src/libexpr/eval-inline.hh:94:31: runtime error: reference binding to null pointer of type 'Env'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../src/libexpr/eval-inline.hh:94:31 in
```
